Hello,
my 376/6 is leaking(a few) at the main jet holder, I have to go on a roadtrip Wednesday.... (french brittany with Club Triton France.)
Probably the screw thread, do you have some advices for me, please ?
Amal monobloc leak
- vince33
- Member
- Posts: 9
- Joined: Tue Jun 02, 2020 3:32 am
- Location: Somerset UK
-
- Posts: 2884
- Joined: Mon Mar 24, 2014 5:44 pm
- Location: Aberdeenshire
Re: Amal monobloc leak
Hi
There is a fibre washer that seals the jet block, a good hardware store should be able to match it or get close enough.
If the leak is coming from the main jet cap, this has no sealing washer, (it seals on a taper), take the cap off and clean both sides of the taper and re-assemble. Don't forget to hold the jet block with a spanner when removing / fitting the cap
Regards Mick
There is a fibre washer that seals the jet block, a good hardware store should be able to match it or get close enough.
If the leak is coming from the main jet cap, this has no sealing washer, (it seals on a taper), take the cap off and clean both sides of the taper and re-assemble. Don't forget to hold the jet block with a spanner when removing / fitting the cap
Regards Mick
- vince33
- Member
- Posts: 9
- Joined: Tue Jun 02, 2020 3:32 am
- Location: Somerset UK
Re: Amal monobloc leak
Yes, there is the fiber washer.