1959 350 headstock bearings

Information relating to the Matchless G3 or AJS Model 16 350cc Heavyweight
Post Reply
Radcap
Member
Posts: 133
Joined: Wed Oct 12, 2005 10:45 pm
Location: MANCHESTER UK

1959 350 headstock bearings

Post by Radcap »

Im assembling the forks. 1959 350.
I have 2 bottom cups for the bearings i have the bearings. The manual/parts book. Show only one cup for the top bearings (i have this and the bearings)
The face in the head set is flat and no seat for the bearings??? Is this correct or am i missing a seat that may have come out from the top yoke ?
Steve
You do not have the required permissions to view the files attached to this post.
User avatar
dave16mct
Member
Posts: 3242
Joined: Mon Jan 01, 1990 12:00 am
Location: LANCASHIRE UK

Re: 1959 350 headstock bearings

Post by dave16mct »

Hi Steve,
the 2 rounded cups go in the frame. The cup with the taper goes on the bottom yoke. The cup with the square section goes in the top yoke. I think you've mislaid it.
Dave
Radcap
Member
Posts: 133
Joined: Wed Oct 12, 2005 10:45 pm
Location: MANCHESTER UK

Re: 1959 350 headstock bearings

Post by Radcap »

I will have another look.
Cheers
Post Reply