Page 1 of 1
Footrest Bar
Posted: Thu Feb 08, 2024 8:11 am
by FredpB
Could anyone tell me the length of the footrest bar that goes through the frame and holds the rear brake pedal and pillion footrests?
Thanks
Re: Footrest Bar
Posted: Sun Feb 11, 2024 10:45 am
by Red Gauntlet
042446 Rod 9 -3/8 x 1/2 - thread 5/8 x 7/16
Re: Footrest Bar
Posted: Wed Feb 14, 2024 6:51 pm
by FredpB
What happened to my post?
Re: Footrest Bar
Posted: Wed Feb 14, 2024 6:55 pm
by SPRIDDLER
FredpB wrote: ↑Wed Feb 14, 2024 6:51 pm
What happened to my post?
If you mean this one it's still there on my screen...............
FredpB wrote: ↑Thu Feb 08, 2024 8:11 am
Could anyone tell me the length of the footrest bar that goes through the frame and holds the rear brake pedal and pillion footrests?
Thanks
Re: Footrest Bar
Posted: Wed Feb 14, 2024 6:59 pm
by FredpB
There was a post after that stating the information was not quite correct
Re: Footrest Bar
Posted: Thu Feb 15, 2024 1:00 am
by Eamonn
There appeared to be replication in the posted answers and so some entries were removed from the system.
The spares website (
https://www.amoc-parts.com) gives the dimensional details as:
"lightweight Footrest Rod 9 1/2" Also Centre Stand Rod
7/16" square section. These are in bare steel so will require painting."
Re: Footrest Bar
Posted: Fri Feb 16, 2024 7:24 pm
by Red Gauntlet
I think the two bars have different dimensions, the one that was asked for was the rear one not the main footpeg bar...