I have a question regarding a set of front tank mountings I purchased from Jampot Spares for my 1961 650.
The rubbers 021174 obviously have to be split to accomodate the turned down flange of bolt 027161. As delivered the rubbers are not split. The material is quite hard but a hacksaw will work. Do I have the correct rubbers, and should the split go all the way from top to bottom?
Tank mountings
-
- Member
- Posts: 15
- Joined: Sat Jan 19, 2019 7:30 pm
- Location: Oslo, Norway
Tank mountings
Anders Welle
- dave16mct
- Member
- Posts: 3243
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LANCASHIRE UK
Re: Tank mountings
No the bolt just has to bite in.
Dave.
Dave.
- ajscomboman
- Member
- Posts: 3971
- Joined: Mon Jan 01, 1990 12:00 am
- Location: HAMPSHIRE UK
-
- Member
- Posts: 15
- Joined: Sat Jan 19, 2019 7:30 pm
- Location: Oslo, Norway