Page 1 of 1

centre stand removal/refitting

Posted: Thu Mar 09, 2023 11:21 am
by CootsyUK
Hi guys.
I know this will have been discussed before but before I start trawling through all the previous posts; has anyone got any tips on removing the centre stand on my very late model CSR?
I'm (still) a novice and I've never tackled this on any bike before so any instructions will be welcome; as will re-fitting tips.

Thanks guys.

Re: centre stand removal/refitting

Posted: Thu Mar 09, 2023 7:14 pm
by SPRIDDLER
No need to trawl through previous posts as there are several detailed descriptions of removal and fitting in the 'Technical Articles' section......

(Some find it helps to work on the stand by laying the bike on its side on an old cushion. Obviously the battery needs to be removed if it is wet one and consideration given to oil spilling out of its tank).

See here:

https://www.jampot.com/article_showall. ... ame=Frames

Re: centre stand removal/refitting

Posted: Thu Mar 09, 2023 10:16 pm
by CootsyUK
Solved in a one-er,
Thanks for this gem of information Spriddler!

Best regards,
Tony