Alu Rear Mudguard

[ajsph]

Does anyone know where I can get an Alu Rear Mudguard for my 1960 18CS. AMC classic parts is out of stock
Thanks Poul

[Wayne Cole]

Does anyone know where I can get an Alu Rear Mudguard for my 1960 18CS. AMC classic parts is out of stock
Thanks Poul

is that a trials bike? I think these links are what you are looking for, if not sorry. link 1 - https://www.feked.com/classic-trials-bi ... wheel.html link 2- https://www.vintage-motorcycle.com/en/p ... -d-section. I could be completely wrong here but... link 3 - https://www.caferacerwebshop.com/en/sta ... A8EALw_wcB

[ajsph]

no it is not a trials bike, it is a roadgoing Competition, and the mudguard I am after, is the same as om the CSR models.
Thanks Poul

[g80csp11]

I think you will find that Steve has the best mudguards , and you will have to wait until he gets them in if you want a new one
You will not be happy with Generic Aluminium ones
You could try talking to Mike Partridge at Waldridge motors , but i dont have any experience of his . obviously cost will be a problem

https://www.walridge.com/wp-content/upl ... ressed.pdf

[ajsph]

Yes Peter you are right, I need som patience.
Poul

[Joker_Bones]

I have used these rear ally guards...
This one is from AMC classic spares on a '66 N15CS with a 18" x 4" rear

IMG_20230209_161140.jpg

This is a generic one from IIRC Clasic Bike Shop on a '60 G12 with a 19" x 4" rear.

IMG_20230209_161510.jpg

They are similar, not identical... Both 140mm wide, the AMC classic one has a slightly deeper section, about 50mm as to about 40mm on the other. The AMC one is a slightly larger radius and so sits a little higher over the tyre.
I am happy enough with both of them.