Re: AMC clutch plates
Posted: Thu Mar 23, 2023 9:23 am
Clive , there are only two types of AMC clutch on our bikes
yours if definitely this type
https://andover-norton.co.uk/en/shop-drawing/886/clutch
If you check the parts list for 1958 , it lists 5 plain plates and 4 friction plates for everything except G3LS that has one less of each
so you are right that it should have the extra plain plate against the spring carrier
The Norton site is incorrect as is only lists 4 of each
General rule is the end of the spring adjuster flush with the stud , you can of course test it before putting cover on and adjust accordingly . I have found some friction plates are thicker than original and therefore would adjust the tension
yours if definitely this type
https://andover-norton.co.uk/en/shop-drawing/886/clutch
If you check the parts list for 1958 , it lists 5 plain plates and 4 friction plates for everything except G3LS that has one less of each
so you are right that it should have the extra plain plate against the spring carrier
The Norton site is incorrect as is only lists 4 of each
General rule is the end of the spring adjuster flush with the stud , you can of course test it before putting cover on and adjust accordingly . I have found some friction plates are thicker than original and therefore would adjust the tension