Page 1 of 1
Camshafts
Posted: Sat Jun 11, 2022 12:02 am
by RodneyK
I think the inlet and exhaust camshafts have been switched on the initial re-assembly of my 55 G9B. Before I pull it apart to correct this I have to check;
Inlet cam has a slot in the end. Exhaust cam has a “tongue” on the end. Correct?
Sorry to bother you but I don’t want to split the cases again until I’m sure.
Re: Camshafts
Posted: Sat Jun 11, 2022 12:12 pm
by SPRIDDLER
From the 1955 spares List. See here:
http://archives.jampot.dk/book/Spares_l ... s_List.pdf
It would seem that the inlet has the slot...........
Camshafts 1955 twin.JPG
Camshafts 55 spares list.JPG
Re: Camshafts
Posted: Sat Jun 11, 2022 1:04 pm
by g80csp11
the easy way to tell is look at the oil distribution that is driven by the exhaust camshaft 022385
https://www.amoc-parts.com/store/comers ... duct=21478
Re: Camshafts
Posted: Sat Jun 11, 2022 4:40 pm
by RodneyK
Right. Oh well. They must be switched. Thanks for confirming.
Re: Camshafts
Posted: Sat Jun 11, 2022 6:50 pm
by dave16mct
It sounds OK to me. The oil distributor has a slot to fit on the exhaust cam's tongue.
Dave.