Page 2 of 2

Re: Rear Loop Bottom Stud Spacer

Posted: Thu Aug 13, 2020 8:06 pm
by g80csp11
Rob , perhaps you should watch my P11 rebuild over the next few days , then when you have to strip yours down you will know in advance what it looks like
same Norton Atlas engine fitted to G15 and P11

Re: Rear Loop Bottom Stud Spacer

Posted: Thu Aug 13, 2020 8:19 pm
by ajscomboman
raffles wrote:Just trying for a bit of humour
Tony

:beer: :beer:

Re: Rear Loop Bottom Stud Spacer

Posted: Thu Aug 13, 2020 8:26 pm
by ajscomboman
g80csp11 wrote:Rob , perhaps you should watch my P11 rebuild over the next few days , then when you have to strip yours down you will know in advance what it looks like
same Norton Atlas engine fitted to G15 and P11
I know what the bugger looks like! I've been getting too close and personal with mine!! It was supposedly a rebuilt article but it's not proving to be quite what I'd hoped. I'm awaiting some g/box bushes and a sprocket that's not as hooked as Cpt Hooks hand!! Then I'll be back into the reassembly along with new stator and rotor. I've got a little wiggle room with the new stator so hopefully I'll be able to centre it a bit better than the previous owner set it up.

I'll still be watching your your progress though.