Yes saw pictures Rob. If you have the part numbers Rob, but not able to or have time to add pt. no's to items in the picture, nut, bolt, washer, spacer. I will add them to the picture for youajscomboman wrote:Pictures submitted, already made them Rob. Got some other areas I need to look at and I know there will be some 65 models at the Jampot so I'll have my phone camera ready.
1965 rear mudguard support tubes
- Rob Harknett
- Member
- Posts: 11211
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: 1965 rear mudguard support tubes
-
- Member
- Posts: 601
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: FRANCE
Re: 1965 rear mudguard support tubes
Hello Rob,
I have submitted in "Pictures" 2 photos meaning grab rail and spacer + sleeve for 64/65 G12/31 CSR vith N....n type mudguard.
Hope this helps you.
From memory grab rails went from ANDOVER, or NORVIL.
I had the spacers. The sleeve nuts went from AMC spares (new).
My mudguard is similar to 650 SS or ATLAS, except the front bottom, with a recess to clear the swinging arm.
The number plate holder is of the "ribbed" type "closed", but for the same years some are of "open" type.
Kind regards.
I have submitted in "Pictures" 2 photos meaning grab rail and spacer + sleeve for 64/65 G12/31 CSR vith N....n type mudguard.
Hope this helps you.
From memory grab rails went from ANDOVER, or NORVIL.
I had the spacers. The sleeve nuts went from AMC spares (new).
My mudguard is similar to 650 SS or ATLAS, except the front bottom, with a recess to clear the swinging arm.
The number plate holder is of the "ribbed" type "closed", but for the same years some are of "open" type.
Kind regards.
-
- Member
- Posts: 601
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: FRANCE
Re: 1965 rear mudguard support tubes
My grab rails came from NORVIL : 022633C
-
- Member
- Posts: 373
- Joined: Wed Feb 01, 2012 1:22 pm
- Location: Vestland NORWAY
Re: 1965 rear mudguard support tubes
http://www.jampot.com/pic_display.asp?id=5262ajscomboman wrote:Pictures submitted, already made them Rob. Got some other areas I need to look at and I know there will be some 65 models at the Jampot so I'll have my phone camera ready.
Part numbers:
Top pivot bolt 018648
Washer 000010
Spacer 029446
Sleeve nut 016712
A dimensioned sketch of a genuine part 029446 would be very helpful as it's not offered by any of the known sources.
Rgds.
Knut