1964 G12 majestic oil filtration

wayne fields · Post by **wayne fields** » Sun Apr 09, 2006 7:50 am

hi. has anyone fitted a filter on the pressure side using the apature fore the existing felt type filter? if so would it be possible to obtain a plan or drawing of such a modification .
my e add is.
wayne.bronwyn@value.net,nz

Biscuit · Post by **Biscuit** » Sun Apr 09, 2006 9:48 pm

Wayne, we have an infrequent section member with a late 31CSR with a 'Hurricane' engine, or so it says on the tank, with an oil filter sticking out from the original felt filter aperture, I'll see if I can obtain some info.

wayne fields · Post by **wayne fields** » Mon Apr 10, 2006 8:03 am

HI. ALAN.
thanks for replying, would realy appreciate anything you can come up with
thanks .WAYNE

Eric · Post by **Eric** » Mon Apr 10, 2006 9:20 pm

Wayne I have sent you an email. If you dont receive it let me know on this forum.

wayne fields · Post by **wayne fields** » Tue Apr 11, 2006 8:13 am

hi eric
6 pm nz time
no email yet regards wayne

Eric · Post by **Eric** » Tue Apr 11, 2006 9:25 am

I am the secretary of the East Midlands section so my contact details are published inside the back page of Jampot as part of the sections.Edited by - Eric on 11 Apr 2006 08:31:03 AM

Biscuit · Post by **Biscuit** » Tue Apr 11, 2006 8:26 pm

Hi Wayne. Neil Lynn, Jampot advertiser used to make them, but now does not. Malcolm Saggers also used to produce the adaptors but certain drawbacks led him to change the system to an under the seat filter, so I'm afraid we have drawn a blank.

wayne fields · Post by **wayne fields** » Tue Apr 11, 2006 8:51 pm

HI . ANY CHSNCE OF A PHOTO OF THE PROTOTYPE . ICOULD THEN SEE EXACTLY WHAT IS REQUIRED.
REGARDS WAYNE

Biscuit · Post by **Biscuit** » Tue Apr 11, 2006 10:09 pm

will do when it arrives.