G80c/s Big end
-
- Posts: 13
- Joined: Thu Jul 08, 2010 4:01 pm
- Location: ONTARIO CANADA
G80c/s Big end
Hi I have just aquired a 1961 G80c/s in boxes so I am looking at the parts for the engine and I look at the con rod and it has a sealed bearing for the bigend!when I stopped laughing it really has a sealed bearing pressed into the rod, there is no bigend pin so I don't know how it was held in the rod.the rest of the parts to make up the flywheels are in rough shape it almost looks as if the entire bottom end ran without oil.I have a spare set of flywheels so all is not lost but I thought I would share this with you guys.thanks derek
-
- Member
- Posts: 2882
- Joined: Mon Jan 01, 1990 12:00 am
- Location: USA USA
G80c/s Big end
Cheers, Don.
-
- Posts: 7721
- Joined: Tue Nov 22, 2005 6:01 pm
- Location: UK
G80c/s Big end
a big end for this on ebay UK just now
http://www.ebay.co.uk/itm/AJS-MATCHLESS ... 2e0bEdited by - itma on 01 Apr 2012 6:26:24 PM
http://www.ebay.co.uk/itm/AJS-MATCHLESS ... 2e0bEdited by - itma on 01 Apr 2012 6:26:24 PM
-
- Posts: 13
- Joined: Thu Jul 08, 2010 4:01 pm
- Location: ONTARIO CANADA
G80c/s Big end
Thanks ITMA I have a bid on that,hey Don what happened to your message?never known you to be stuck for words LOL
has anyone come across this before.derek
has anyone come across this before.derek
-
- Member
- Posts: 2882
- Joined: Mon Jan 01, 1990 12:00 am
- Location: USA USA
G80c/s Big end
I thought the "Smilies" summed up my thoughts. Cheers, Don.