Extra Holes in my Tool Box

niagra · Post by **niagra** » Mon Oct 17, 2011 2:58 pm

Thanks for the responses; took me a while to see the inside-out-ness of the image!

So, just to confirm: I need three holes in the base and one in the lid and I can fill up the three pairs of small holes in the base?

What about the holes in the side (left edge as you look at the picture) which still have screws in and some kind of electrical thingy attached?

rex.webb · Post by **rex.webb** » Mon Oct 17, 2011 3:01 pm

AMY form the Medowa Centre Cambridge says i am "RIGHT".?
Her eyes are younger then ours !.
Ride with Care and LIve Long to ENJOY yourBIKES and Scooters.
insured with Peter James.

1608 · Post by **1608** » Mon Oct 17, 2011 3:13 pm

Can't see the electrical thingy well enough to say what that is. The hole in the lid though was probably for an impromtu Ign or cut out switch at a guess.

niagra · Post by **niagra** » Mon Oct 17, 2011 3:47 pm

Here's a close up of the "electrical type thingy". It has a slot through the tool box and the two screw holes.

1608 · Post by **1608** » Mon Oct 17, 2011 4:14 pm

Sorry, I'm no wiser. Shouldn't worry though, it doesn't look like a standard fitment.

bigwol · Post by **bigwol** » Mon Oct 17, 2011 5:10 pm

Dario, put another image on from a different angle please, that damn lid still looks inside out to me and it's driving me nutts!

niagra · Post by **niagra** » Mon Oct 17, 2011 5:21 pm

Heh, heh. Happy to oblige, it's got the lip visible in this one so that shouldn't confuse any aged eyes.