G2 flywheels needed

Information relating to the Matchless G2 or AJS Model 14 250cc Lightweight
Post Reply
itma
Posts: 7724
Joined: Tue Nov 22, 2005 6:01 pm
Location: UK

G2 flywheels needed

Post by itma »

I badly need a decent set of cast iron [not steel csr]flywheels for this G2 I am getting heartily sick of.

I'm not concerned about shafts or bigend, just the wheels,
Anyone got a spare set please? preferably near enough to Wiltshire so I can collect?
Dougie
Posts: 294
Joined: Thu Sep 30, 2004 1:00 am
Location: KENT UK

G2 flywheels needed

Post by Dougie »

Ken

The truth is, I don't know. But I have a couple of crates of G2 bits in the back of the garage. I can't access them until the weekend (if the weather is fine) when I will wheel a couple of bikes out. I may be able to have a look whilst waiting for the oil to trickle down to the sump on my perishing WD before starting it again!

Oh, I'm in Kent but that may not be a problem? I could be down your way at Easter!

Neal (trading as Dougie!)
Brothers Matt & Neal with joint membership
itma
Posts: 7724
Joined: Tue Nov 22, 2005 6:01 pm
Location: UK

G2 flywheels needed

Post by itma »

Kent is fine Dougie, I can drop in on my daughter for cuppa, I need them before easter tho!!
User avatar
ajscomboman
Member
Posts: 3451
Joined: Mon Jan 01, 1990 12:00 am
Location: HAMPSHIRE UK

G2 flywheels needed

Post by ajscomboman »

Hi Ken

I don't wish to tread on Dougies toes.
Ive got a set in the garage. Southampton is easier for you to get too. So if thats ok with Dougie then your welcome to them.

Rob
Dougie
Posts: 294
Joined: Thu Sep 30, 2004 1:00 am
Location: KENT UK

G2 flywheels needed

Post by Dougie »

Ken & Rob

That's just the ticket, chaps. I don't even know if I've got any 'til I look and this will save me looking!

I've got boxes of sh*t, sorry, I mean "spares", all over the garage and I don't even know what's in them!
Brothers Matt & Neal with joint membership
itma
Posts: 7724
Joined: Tue Nov 22, 2005 6:01 pm
Location: UK

G2 flywheels needed

Post by itma »

PM coming your way Rob
Post Reply