Swinging arm through hole

Information relating to the Matchless G2 or AJS Model 14 250cc Lightweight
Post Reply
PhilSutton
Member
Posts: 8
Joined: Thu Sep 12, 2024 6:02 pm
Location: N E Lincs UK

Swinging arm through hole

Post by PhilSutton »

Hi there,
Anybody tell me what the 8mm hole does on the near side swinging arm?
Has it anything to do with missing side stand?
Thanks,Phil
You do not have the required permissions to view the files attached to this post.
PhilSutton
Member
Posts: 8
Joined: Thu Sep 12, 2024 6:02 pm
Location: N E Lincs UK

Re: Swinging arm through hole

Post by PhilSutton »

Sorry for duplication,didnt think 1st post had gone.🤔
Phil
desperate
Member
Posts: 52
Joined: Sun Oct 29, 2023 7:42 pm
Location: Surrey, UK

Re: Swinging arm through hole

Post by desperate »

On mine the chain guard is fixed to two similar holes on the swinging arm.

Desp
User avatar
Tolly
Member
Posts: 656
Joined: Mon Jan 01, 2001 12:00 am
Location: KENT UK

Re: Swinging arm through hole

Post by Tolly »

It could be the fixing point for the full closed in chain guard. I see you only have a top half one.
_______________________________________________________

Experience is something you don't get until just after you need it.
PhilSutton
Member
Posts: 8
Joined: Thu Sep 12, 2024 6:02 pm
Location: N E Lincs UK

Re: Swinging arm through hole

Post by PhilSutton »

Thanks men,just looking at a blue 250 AJS on Ebay..his photos show its a guard mounting point.
Here's another question for you,where would the original equipment side stand be mounted..and can they be found?
Phil
Phil
Webby900
Posts: 16
Joined: Sat Mar 05, 2022 10:03 pm
Location: Suffolk UK

Re: Swinging arm through hole

Post by Webby900 »

The side is mounted under the lower section of the frame. They are now available from owners spares , they were as rare as rocking horse 😂
PhilSutton
Member
Posts: 8
Joined: Thu Sep 12, 2024 6:02 pm
Location: N E Lincs UK

Re: Swinging arm through hole

Post by PhilSutton »

Thanks for your help,will have a look.👍
Phil
Post Reply