Im assembling the forks. 1959 350.
I have 2 bottom cups for the bearings i have the bearings. The manual/parts book. Show only one cup for the top bearings (i have this and the bearings)
The face in the head set is flat and no seat for the bearings??? Is this correct or am i missing a seat that may have come out from the top yoke ?
Steve
1959 350 headstock bearings
-
Radcap
- Member
- Posts: 135
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: MANCHESTER UK
1959 350 headstock bearings
You do not have the required permissions to view the files attached to this post.
-
dave16mct
- Member
- Posts: 3246
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LANCASHIRE UK
Re: 1959 350 headstock bearings
Hi Steve,
the 2 rounded cups go in the frame. The cup with the taper goes on the bottom yoke. The cup with the square section goes in the top yoke. I think you've mislaid it.
Dave
the 2 rounded cups go in the frame. The cup with the taper goes on the bottom yoke. The cup with the square section goes in the top yoke. I think you've mislaid it.
Dave
-
Radcap
- Member
- Posts: 135
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: MANCHESTER UK
Re: 1959 350 headstock bearings
I will have another look.
Cheers
Cheers