Hi and a happy holiday season to all
The wiring was missing from my’25 E1 when I got it
I’m assuming AJS would have been using a cloth covered wire at that time ? I found a wiring diagram for the bike but no colors were called out. Did AJS use different colors of wire ? If so, any insight as to what colors for what ? Or did they just use all black ?
Again, thanks for any help. Dave
What kind of wire ?? Color??
-
- Member
- Posts: 36
- Joined: Sat Nov 11, 2023 3:31 am
- Location: Wi USA
- jackstringer
- Member
- Posts: 327
- Joined: Thu Oct 08, 2009 6:09 pm
- Location: Somerset UK
- Contact:
Re: What kind of wire ?? Color??
The diagram should have wire colours but its not always easy to read.
-
- Member
- Posts: 16
- Joined: Wed Jan 05, 2022 2:09 pm
- Location: Suffolk UK
Re: What kind of wire ?? Color??
It is possible to rewire the dynamo to a 2 brush configuration to be used without the shunt resistor in the headlamp and run on a modern regulator.
hope this helps a bit.
You do not have the required permissions to view the files attached to this post.
-
- Member
- Posts: 36
- Joined: Sat Nov 11, 2023 3:31 am
- Location: Wi USA
Re: What kind of wire ?? Color??
Thx, that helps. And yes, Peter de kremer will be doing the magdyno for me and he recommends converting to the two brush setup