Hi Everyone
I need to replace the rear brake drum on my 1929 M6 as it's well beyond skimming etc, and I'm sure that there's a readily available alternative available for a more modern bike that I could adapt.
From what I can see I'd have to cut/grind the old drum off the sprocket before welding or riveting a replacement on.
Has anyone done something similar? If so what was the replacement drum that you used? Unfortunately all the adverts for brake drums that I've found say what bike they're for rather than giving dimensions.
Cheers
Tim
M6 rear brake drum
-
- Member
- Posts: 31
- Joined: Thu Mar 31, 2022 5:47 am
- Location: Nsw AUSTRALIA
-
- Member
- Posts: 755
- Joined: Thu Mar 31, 2005 1:00 am
- Location: BERKS UK
Re: M6 rear brake drum
What diameter is the drum? There's plenty of 7 in drums out there, and BSA 8 inch single sided drums are cheap enough at autojumbles. Andy
-
- Member
- Posts: 755
- Joined: Thu Mar 31, 2005 1:00 am
- Location: BERKS UK
Re: M6 rear brake drum
What diameter is the drum? There's plenty of 7 in drums out there, and BSA 8 inch single sided drums are cheap enough at autojumbles. Not a brake, I know, but I have sucessfully grafted a new clutch drum on to a chainwheel. Look at Brufnut.de website, he hasplenty on brake drums on pre war Broughs, the principles would be the same. Andy
-
- Member
- Posts: 31
- Joined: Thu Mar 31, 2022 5:47 am
- Location: Nsw AUSTRALIA
Re: M6 rear brake drum
Hi Andy
I think the original internal diameter would have been 6 1/4". I could make one from scratch, but it would take me a very long time on my little lathe. 6 1/4" comes out at 158.75 mm, so I'm hoping I'll be able to track a modern one at 155mm which I can adjust.
Cheers
Tim
I think the original internal diameter would have been 6 1/4". I could make one from scratch, but it would take me a very long time on my little lathe. 6 1/4" comes out at 158.75 mm, so I'm hoping I'll be able to track a modern one at 155mm which I can adjust.
Cheers
Tim
-
- Member
- Posts: 755
- Joined: Thu Mar 31, 2005 1:00 am
- Location: BERKS UK
Re: M6 rear brake drum
Honda 175s used a 160mm drum if that's any use. Andy
-
- Member
- Posts: 31
- Joined: Thu Mar 31, 2022 5:47 am
- Location: Nsw AUSTRALIA
Re: M6 rear brake drum
Thanks Andy, I'll do some investigating.
Cheers
Tim
Cheers
Tim