Anti wet sump tap

Helpful information and requests for assitance and advice
User avatar
G3L1946
Member
Posts: 542
Joined: Tue Feb 25, 2020 1:57 pm
Location: North Yorkshire UK

Re: Anti wet sump tap

Post by G3L1946 »

Hi Johnny B

Just seen comment earlier re grease and swinging arm? I use heavy gear oil D140 Castrol Classic oil. Put in a long nosed oil can, heated up a bit and then entered into swinging arm via hole until it just starts to run out.

Cheers,
Steve
Last edited by G3L1946 on Sun Jun 04, 2023 3:34 pm, edited 1 time in total.
User avatar
Taid
Posts: 710
Joined: Mon Oct 07, 2019 3:35 pm
Location: Shropshire UK

Re: Anti wet sump tap

Post by Taid »

This is my set up on a 16ms .. using the Feked tap with switch ..

The switch controls all the electrics, including disabling the magneto via a relay ..

I know it works, 'cos, on occasion, I have forgotten to open it and the bike just will not start .. 🤔🤔

I use it to stop the engine, rather than the decompressor, so I don't forget to close it ..

20230604_141907.jpg
You do not have the required permissions to view the files attached to this post.
___

Now sold ... 1956 AJS 16MS Bitsa .. HSU 414 .. rebuilt/re-registered 1987
Post Reply