Any idea what threads are supposed to be on this peg?
1929 M5
Thanks
Kickstart peg
-
- Member
- Posts: 63
- Joined: Tue May 14, 2019 11:45 am
- Location: Carmarthenshire UK
Kickstart peg
You do not have the required permissions to view the files attached to this post.
-
- Member
- Posts: 8558
- Joined: Wed Sep 01, 2004 1:00 am
- Location: WEST SUSSEX UK
Re: Kickstart peg
Can you not identify the thread on the other one, (assuming the other one isn't mullered) ?
'There is a tide in the affairs of men
Which taken at the flood............'
Which taken at the flood............'
- clive
- Member
- Posts: 5669
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LONDON UK
Re: Kickstart peg
Two kickstarts now that is a new idea that must have faded out in postwar bikes.......
clive
if it ain't broke don't fix
if it ain't broke don't fix
-
- Member
- Posts: 8558
- Joined: Wed Sep 01, 2004 1:00 am
- Location: WEST SUSSEX UK
Re: Kickstart peg
Oh dear. I wasn't reading carefully and the residue of what passes for my brain just registered 'peg'.
'There is a tide in the affairs of men
Which taken at the flood............'
Which taken at the flood............'
-
- Member
- Posts: 63
- Joined: Tue May 14, 2019 11:45 am
- Location: Carmarthenshire UK
Re: Kickstart peg
Update - threads made - I had to build up weld and a good friend turned new threads - the bigger was a left hand thread and 26tpi the smaller was 20tpi and right hand thread
You do not have the required permissions to view the files attached to this post.