Hi all,
Forgive the rather basic question but I just want to double check. Sequence for carburettor fitting is cylinder- paper gasket- heat block- carburettor ( with O ring providing seal with heat block/ no additional gasket). G3LS 1955 376/5 carburettor . As I get older my confidence takes more frequent holidays!
Steve
Gasket sequence on carb.
-
G3L1946
- Member
- Posts: 542
- Joined: Tue Feb 25, 2020 1:57 pm
- Location: North Yorkshire UK
-
clive
- Member
- Posts: 5662
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LONDON UK
-
G3L1946
- Member
- Posts: 542
- Joined: Tue Feb 25, 2020 1:57 pm
- Location: North Yorkshire UK
Re: Gasket sequence on carb.
Thanks Clive
Steve
Steve
-
AFPU
- Member
- Posts: 55
- Joined: Sun Oct 03, 2021 7:09 pm
- Location: New South Wales AUSTRALIA
- Location: Kenninghall
Re: Gasket sequence on carb.
Would you grease the mating surfaces for the gasket and the heat block or just dry fit?
Gary
"Any fool can make things complicated but it takes a genius to make things simple"
"Any fool can make things complicated but it takes a genius to make things simple"
-
G3L1946
- Member
- Posts: 542
- Joined: Tue Feb 25, 2020 1:57 pm
- Location: North Yorkshire UK
Re: Gasket sequence on carb.
Hi,
No reference found in my various manuals indicating anything other than dry fit. Ergo, that’s the way I fitted it with no resultant evidence of leaks.
Steve
No reference found in my various manuals indicating anything other than dry fit. Ergo, that’s the way I fitted it with no resultant evidence of leaks.
Steve