If you tighten the nuts until you are happy with them then apply a bit of silicon sealant to the remaining thread that sticks out they will not undo. I use ordinary black bathroom silicon .
They will also undo easily when you want to remove the carb .
Nut size please!
-
- Member
- Posts: 277
- Joined: Wed Feb 07, 2018 12:02 am
- Location: Essex
-
- Member
- Posts: 277
- Joined: Wed Feb 07, 2018 12:02 am
- Location: Essex
Re: Nut size please!
Ordinary silicon sealant on the remaining thread after you have done the nuts up . I use black bathroom sealant. If you want to remove the carb it will easily undo through the silicon.
- G3L1946
- Member
- Posts: 542
- Joined: Tue Feb 25, 2020 1:57 pm
- Location: North Yorkshire UK
Re: Nut size please!
Chris,
Thanks for tip!
Steve
Thanks for tip!
Steve