Nut size please!

Helpful information and requests for assitance and advice
ChrisTheChippy
Member
Posts: 274
Joined: Wed Feb 07, 2018 12:02 am
Location: Essex

Re: Nut size please!

Post by ChrisTheChippy »

If you tighten the nuts until you are happy with them then apply a bit of silicon sealant to the remaining thread that sticks out they will not undo. I use ordinary black bathroom silicon .
They will also undo easily when you want to remove the carb .
ChrisTheChippy
Member
Posts: 274
Joined: Wed Feb 07, 2018 12:02 am
Location: Essex

Re: Nut size please!

Post by ChrisTheChippy »

Ordinary silicon sealant on the remaining thread after you have done the nuts up . I use black bathroom sealant. If you want to remove the carb it will easily undo through the silicon.
User avatar
G3L1946
Member
Posts: 542
Joined: Tue Feb 25, 2020 1:57 pm
Location: North Yorkshire UK

Re: Nut size please!

Post by G3L1946 »

Chris,

Thanks for tip!

Steve
Post Reply