Hi .. Crank binding when on top stroke and and free on bottom stroke. there's about 5th play on bottom and no clearance on top stroke,
Ive moved the centre web around but to no avail, I wonder if crank is slightly bent ! Any ideas .
Regards....Paul
Crank Binding M20 but can be relative to any twin
-
- Member
- Posts: 37
- Joined: Wed Jan 01, 1997 12:00 am
- Location: SOUTH YORKSHIRE UK
-
- Member
- Posts: 1579
- Joined: Mon Jan 01, 1990 12:00 am
- Location: WEST SUSSEX UK
Re: Crank Binding M20 but can be relative to any twin
has it just been reground ?
Are rods free when fitted to crankshaft and also centre web before you fit to crankcase halves . if yes to both of these it might be radius on thh centre web ( scrape edge of shell)
Are rods free when fitted to crankshaft and also centre web before you fit to crankcase halves . if yes to both of these it might be radius on thh centre web ( scrape edge of shell)
-
- Member
- Posts: 37
- Joined: Wed Jan 01, 1997 12:00 am
- Location: SOUTH YORKSHIRE UK
Re: Crank Binding M20 but can be relative to any twin
Hi. Yes been reground and rods and centre web free before fitting. Im not sure exactly what you mean but i will have a look thanks .