centre stand removal/refitting

Information relating to the Matchless G12 or AJS Model 31 650cc twin
Post Reply
CootsyUK
Member
Posts: 17
Joined: Sat May 09, 2020 11:38 pm
Location: Cumbria UK

centre stand removal/refitting

Post by CootsyUK »

Hi guys.
I know this will have been discussed before but before I start trawling through all the previous posts; has anyone got any tips on removing the centre stand on my very late model CSR?
I'm (still) a novice and I've never tackled this on any bike before so any instructions will be welcome; as will re-fitting tips.

Thanks guys.
SPRIDDLER
Member
Posts: 8542
Joined: Wed Sep 01, 2004 1:00 am
Location: WEST SUSSEX UK

Re: centre stand removal/refitting

Post by SPRIDDLER »

No need to trawl through previous posts as there are several detailed descriptions of removal and fitting in the 'Technical Articles' section......

(Some find it helps to work on the stand by laying the bike on its side on an old cushion. Obviously the battery needs to be removed if it is wet one and consideration given to oil spilling out of its tank).

See here:

https://www.jampot.com/article_showall. ... ame=Frames
'There is a tide in the affairs of men
Which taken at the flood............'
CootsyUK
Member
Posts: 17
Joined: Sat May 09, 2020 11:38 pm
Location: Cumbria UK

Re: centre stand removal/refitting

Post by CootsyUK »

Solved in a one-er,
Thanks for this gem of information Spriddler!

Best regards,
Tony
Post Reply