A question for anyone with a Thorspark unit

[clive]

I drilled a hole through the front facing side of the battery box and fitted a simple toggle switch, not in the way of anything there and works a treat.

I have one forward mounted on one bike rear mounted on another. Both worked fine but after a while the forward facing one failed. Too much riding in the rain. Its been replaced by a waterproof toggle switch ( merely an integral rubber cover) which has been fine. No problem with the rear facing one. My batteries are AGM contained in a fake lucas box but there is clearance for the switch above them.

[Taid]

Not directly on topic but follows other comments ..

All my electrics are controlled from a relay powered from the switch on my anti-sumping tap .. also disables magneto when tap shut ..