1933 model 12 cush drive spring

Information relating to Matchless and AJS Models built prior to 1939
Locked
Tazmantic
Member
Posts: 388
Joined: Tue May 25, 2021 10:50 pm
Location: Oxfordshire UK

1933 model 12 cush drive spring

Post by Tazmantic »

Anyone know what spring is right for the cush drive I would guess the OD would be about 1 3/4 and the ID 34mm ish (sorry for the mixed measurements)

Cheers
Everyday’s a learning curve.
Tazmantic
Member
Posts: 388
Joined: Tue May 25, 2021 10:50 pm
Location: Oxfordshire UK

Re: 1933 model 12 cush drive spring

Post by Tazmantic »

I think it should look like this
You do not have the required permissions to view the files attached to this post.
Everyday’s a learning curve.
SPRIDDLER
Member
Posts: 8542
Joined: Wed Sep 01, 2004 1:00 am
Location: WEST SUSSEX UK

Re: 1933 model 12 cush drive spring

Post by SPRIDDLER »

I've really no idea but if it's of any help there's an illustration (Pt. No. 569) on page 8 and listed on page 14 in the Spares List here:

http://archives.jampot.dk/book/Spares_l ... s_List.pdf
'There is a tide in the affairs of men
Which taken at the flood............'
Locked