WIth my stock of BA inserts in dire need of replenishment I called and then ordered various packs of 10 in 0, 2, 3 & 4 BA, in various lengths.
To France in 4 days. Friendly - and excellent - service. Impressed with the quality too - German made, and not like soft wire as some I have had.
I'm sure many here use them regularly, but credit where it's due, particularly as it has been an ongoing struggle for them to keep some sizes (eg 3BA) in production owing to limited demand . . .
(The equally excellent Tracy Tools seem not to stock inserts in this series.)
https://uni-thread.com/
Excellent service from Uni-Thread
-
- Member
- Posts: 2166
- Joined: Thu Jul 04, 2002 1:00 am
- Location: NORMANDIE FRANCE
-
- Posts: 2884
- Joined: Mon Mar 24, 2014 5:44 pm
- Location: Aberdeenshire
Re: Excellent service from Uni-Thread
Hi
Totally agree - they're my 'go to' supplier for inserts and tooling, I find their products to be of excellent quality and very competitively priced.
Regards Mick
Totally agree - they're my 'go to' supplier for inserts and tooling, I find their products to be of excellent quality and very competitively priced.
Regards Mick
-
- Member
- Posts: 8587
- Joined: Wed Sep 01, 2004 1:00 am
- Location: WEST SUSSEX UK
Re: Excellent service from Uni-Thread
Cuh! If you lads need to use so many inserts I suggest that you cut down on your Weetabix.
(But of course the threads were probably stripped by a previous owner weren't they? )
(But of course the threads were probably stripped by a previous owner weren't they? )
'There is a tide in the affairs of men
Which taken at the flood............'
Which taken at the flood............'
-
- Member
- Posts: 2166
- Joined: Thu Jul 04, 2002 1:00 am
- Location: NORMANDIE FRANCE
Re: Excellent service from Uni-Thread
Ha! Other people's leccy stuff 99% for me Sprid. But there may be one or two in a timing cover hole on a twin engine or two of my own . . .!