1961 G3ls Dutch Army bike
-
- Deceased
- Posts: 43
- Joined: Thu Jan 23, 2014 10:53 am
- Location: WEST MIDLANDS UK
1961 G3ls Dutch Army bike
Hi everyone. I'm looking for some information regarding my newly aquired 1961 ex-Dutch Army Matchless G3ls 350. The bike is finished in what looks to be original red and silver tank, and red tinware, so I'm assuming the machine was not supplied for 'field' use - I recall somewhere maybe seeing a similar colour scheme on an American export model, but can't be sure.
Has anyone any idea of the paint colour or spec. and also any information on the export model i.e. alternator output, voltage on leaving the factory etc., or any links that can be accessed for details.
I have contacted Roy Bellett for the factory details.
Many thanks in anticipation.
Regards,
Dave T.
Has anyone any idea of the paint colour or spec. and also any information on the export model i.e. alternator output, voltage on leaving the factory etc., or any links that can be accessed for details.
I have contacted Roy Bellett for the factory details.
Many thanks in anticipation.
Regards,
Dave T.
-
- Member
- Posts: 3543
- Joined: Sun Jan 01, 1995 12:00 am
- Location: ESSEX UK
Re: 1961 G3ls Dutch Army bike
Is this the bike that was on eBay?
You do not have the required permissions to view the files attached to this post.
Roy
- Expat
- Member
- Posts: 1042
- Joined: Thu Nov 12, 2015 2:22 pm
- Location: Tennessee, USA
Re: 1961 G3ls Dutch Army bike
No idea! Looks good though.
Keep shiny side up.
These are my principles, if you don’t like them, I have others. (Groucho Marx)
These are my principles, if you don’t like them, I have others. (Groucho Marx)
- Peter Morris
- Member
- Posts: 733
- Joined: Wed Mar 05, 2014 4:21 pm
- Location: SURREY UK
Re: 1961 G3ls Dutch Army bike
Looks a lot better than my old ex Dutch Army G3, also 1961.
Sorry if this brings back bad memories Neil.
Sorry if this brings back bad memories Neil.
You do not have the required permissions to view the files attached to this post.
Last edited by Peter Morris on Wed Apr 11, 2018 10:29 pm, edited 1 time in total.
- Rob Harknett
- Member
- Posts: 11211
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: 1961 G3ls Dutch Army bike
for 1961 the red bike seems to have wrong bits to me. wrong seat, tank, head, front guard.
- Peter Morris
- Member
- Posts: 733
- Joined: Wed Mar 05, 2014 4:21 pm
- Location: SURREY UK
Re: 1961 G3ls Dutch Army bike
Wow, you have a better eye than me Rob, I can't see the differences, except the seat of course. All of the ex Dutch Army bikes I have seen have a single seat, it was a twin seat that was cut down and the rear end turned over to raise it.Rob Harknett wrote:for 1961 the red bike seems to have wrong bits to me. wrong seat, tank, head, front guard.
Apart from the rack, crash bars etc I don't think it was much different from the road going '61 G3, except nothing was polished. Everything that was polished ali on the road bikes was left rough cast.
- dave16mct
- Member
- Posts: 3284
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LANCASHIRE UK
Re: 1961 G3ls Dutch Army bike
Should look like this one on ebay:
eBay item number:162824096150
Cheers Dave.
eBay item number:162824096150
Cheers Dave.
- Peter Morris
- Member
- Posts: 733
- Joined: Wed Mar 05, 2014 4:21 pm
- Location: SURREY UK
Re: 1961 G3ls Dutch Army bike
Have you seen this in the archives? http://archives.jampot.dk/general/G3_61 ... h_Army.pdf It's in Dutch but there are some stats, and some pictures.
Mine was 6 volt.
Mine was 6 volt.
-
- Deceased
- Posts: 43
- Joined: Thu Jan 23, 2014 10:53 am
- Location: WEST MIDLANDS UK
Re: 1961 G3ls Dutch Army bike
Hi Roy. Yes this is the bike sold on ebay. The picture flatters the current state of the bike, but it will be an interesting project. The bike has 12V electrics (the alternator is an encapsulated windings unit) with (I think) an A reg 1 rectifier(?), and a cartridge oil filter. I don't know the original trim or finish level, but if I can source the paint spec I will probably leave the bike 'as is' and refurbish the tinware, recover the seat, strip and rebuild the motor etc. Thanks for the archive pictures Peter.
Thanks all for your replies.
Cheers.
Dave.
Thanks all for your replies.
Cheers.
Dave.