Rob Harknett wrote:You are wrong Ram. You show a ridged frame also not where the side stand is fitted.
There is a picture showing the side stand. The stand consists leg, a special fitting to fit it on the frame stand lug. Also a spring that fits on the stand leg and hooks in a hole on the underside of the frame rail further back from the stand lug. The club did sell the stand complete with fittings & spring. I recall the club price complete was cheaper than and old bent leg only, you may find second hand
Hi Rob
In your post above you've mentioned a "special fitting to fit it on the frame stand lug". As you're aware mine is a 500 twin (picture you've posted is that of a Single).
Can I know the part number of this iteme - better if I can get a picture
As per the Twin Part list the following are parts for the prop stand
PROP STAND
1) 014719 Stand, prop, bare. ..........
2) 014713 Bolt, hi.nge, for prop stand, 2-¾; iris. by TT in. by 26.:
3) 014139 Nut, for prop stand hinge bolt
4) 000049 Pin, split, for prop stand hinge bolt
5) 021261 Spring, return, for prop stand .
Can you please let me know which is the item you are referring to
As I had requested earlier, I will be really obliged if a photo of the stand and its fitment can be kindly provided.
Best Regards & Thanks
Ram