It is tight with the carb fitted. So the carb has to be slipped off . Top etc removed and refitted, complete with cables fitted. Then put the carb back on. I believe I have managed to change a broken cable with the carb still fitted. To refit, have to open up the throttle to compress the spring. Not sure about that ages since I've done itMalcW wrote:Thanks Colin
There was a bit more space with the Concentric, so I was a bit concerned that it's so tight with the correct carb. I guess it's a bit more spacious with the shorter barrelled 500s and 600s.
Cheers,
Malcolm
The AMC God giveth...
- Rob Harknett
- Member
- Posts: 11211
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: The AMC God giveth...
-
- Member
- Posts: 634
- Joined: Tue Oct 24, 2017 12:05 pm
- Location: DEVON UK
Re: The AMC God giveth...
I'm just relieved that it should be like it, even though it's awkward. I did start harbouring dark thoughts about bent frames...
Malc
Malc
- Rob Harknett
- Member
- Posts: 11211
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: The AMC God giveth...
They did change the carb type in the mid 1930's to a horizontal mixing chamber, but soon went back to vertical. Cables swung out wide round the engine for horizontal carbs. A vertical carb will almost touch the frame. At least in that era, unlike the post war era, bikes HAD to be much more correct. AJS & Matchless were different, also many yearly / model differences.MalcW wrote:I'm just relieved that it should be like it, even though it's awkward. I did start harbouring dark thoughts about bent frames...
Malc
Did you notice my comment part "3" in answer to a comment why do club spares not use part numbers for cables as in the spares books? They do if you look. Pictures to show them and how to find.
-
- Member
- Posts: 634
- Joined: Tue Oct 24, 2017 12:05 pm
- Location: DEVON UK
Re: The AMC God giveth...
Hi Rob
As I posted elsewhere, the excellent service from the club spares means that my new cables, throttle and grips have arrived already, so I look forward to fitting them all asap. I'm getting quite adept at carb fitting and removal.
Yes, I saw your pictures. Thank you, that's very useful.
Malc
As I posted elsewhere, the excellent service from the club spares means that my new cables, throttle and grips have arrived already, so I look forward to fitting them all asap. I'm getting quite adept at carb fitting and removal.
Yes, I saw your pictures. Thank you, that's very useful.
Malc
- Rob Harknett
- Member
- Posts: 11211
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: The AMC God giveth...
Good luck Malcolm. The comment about why club does not use part list book numbers for cables, although they do. Was to help the person that made the comment, aware / how to find the pt. no's.
-
- Member
- Posts: 634
- Joined: Tue Oct 24, 2017 12:05 pm
- Location: DEVON UK
Re: The AMC God giveth...
So,progress is being made. I had to drill the threads out of the carburettor and the chrome clip on the top to clear the top hat ferrules on the new cables. Incidentally, the ferrules were slightly different sizes; is that normal? Then I found that the choke cable inner was about a 1/4" too short, so I wasn't getting full choke. Easily fixed by unwinding some of the cable outer. So I now have the new carb fitted with correctly functioning choke and throttle, the latter being operated by a nice new genuine Amal throttle. And the ugly cartridge oil filter which someone had hung immediately behind the LH fuel tap is now fitted under the seat. I had to move it, partly for aesthetics, but mainly because it fouled the float chamber on the Monobloc.
So there the bike was, on the sidestand, minus tank and seat, and looking quite tidy. I then decided just to kick it over a couple of times to check the new kickstand spring was OK. It was, but on the 2nd kick I rocked the bike a bit too much to the right, the propstand flicked up, and over the bike went. relatively gently, but unfortunately the toolbox lid was open at the time, and it landed on that. So now it doesn't fit too well. Time to pack up for the day...
So there the bike was, on the sidestand, minus tank and seat, and looking quite tidy. I then decided just to kick it over a couple of times to check the new kickstand spring was OK. It was, but on the 2nd kick I rocked the bike a bit too much to the right, the propstand flicked up, and over the bike went. relatively gently, but unfortunately the toolbox lid was open at the time, and it landed on that. So now it doesn't fit too well. Time to pack up for the day...
-
- Posts: 2884
- Joined: Mon Mar 24, 2014 5:44 pm
- Location: Aberdeenshire
Re: The AMC God giveth...
Hi
I've always rigged my side stand to stay extended rather than flick back when the weight is removed - ever since one of my pals AJS was accidently knocked over in the school bike park by someone leaning against it having a smoke.
Incidentally, I'm only aware of side stands that don't stay extended on AMC machines is this correct? (my Triumphs, Velocette, BSA all stayed put).
Regards Mick
I've always rigged my side stand to stay extended rather than flick back when the weight is removed - ever since one of my pals AJS was accidently knocked over in the school bike park by someone leaning against it having a smoke.
Incidentally, I'm only aware of side stands that don't stay extended on AMC machines is this correct? (my Triumphs, Velocette, BSA all stayed put).
Regards Mick
-
- Member
- Posts: 1439
- Joined: Sat Oct 09, 2010 9:17 pm
- Location: ABERTAWE UK
Re: The AMC God giveth...
Mine all stay down for that reason, didn't Ducatti bring out self returning side stands with a few falling over in dealerships.
Colin
Colin
only dead fish go with the flow
-
- Member
- Posts: 8598
- Joined: Wed Sep 01, 2004 1:00 am
- Location: WEST SUSSEX UK
Re: The AMC God giveth...
I much prefer my Matchless side stand to kick up and never attempt to kick-start it unless the centre stand is down or I'm sitting astride.
However I'm happy with the stands on my two modern bikes which always stay down because they have an electrical immobiliser to prevent starting unless the stand is retracted.
However I'm happy with the stands on my two modern bikes which always stay down because they have an electrical immobiliser to prevent starting unless the stand is retracted.
'There is a tide in the affairs of men
Which taken at the flood............'
Which taken at the flood............'
-
- Member
- Posts: 634
- Joined: Tue Oct 24, 2017 12:05 pm
- Location: DEVON UK
Re: The AMC God giveth...
Changing the spring position to keep the stand down is one of the jobs on my list (shame it wasn't a bit further up the list!).Mick D wrote:Hi
I've always rigged my side stand to stay extended rather than flick back when the weight is removed - ever since one of my pals AJS was accidently knocked over in the school bike park by someone leaning against it having a smoke.
Incidentally, I'm only aware of side stands that don't stay extended on AMC machines is this correct? (my Triumphs, Velocette, BSA all stayed put).
Regards Mick
My old Triumph Tiger Cub and my Norton Commando both had stands that stayed down.
Malc