2011 Eos 125cc MK2 wiring loom

This area is for discussion/information on the "modern" AJS motorcycles manufactured in China from 2006 onwards.
User avatar
clive
Member
Posts: 5647
Joined: Mon Jan 01, 1990 12:00 am
Location: LONDON UK

Re: 2011 Eos 125cc MK2 wiring loom

Post by clive »

What state is the battery in? Are you sure you are testing correctly and the voltage drop is not caused by components in the system or poor connections to earth. It seems very unlikely to me that the wiring alone could be responsible for such a drop.
clive
if it ain't broke don't fix
SPRIDDLER
Member
Posts: 8530
Joined: Wed Sep 01, 2004 1:00 am
Location: WEST SUSSEX UK

Re: 2011 Eos 125cc MK2 wiring loom

Post by SPRIDDLER »

Yes, highly unlikely that the wires themselves are to blame.
It is very well known that all Chinese bikes are susceptible to poor quality and/or corroded connectors and switches which need to be given a good clean.
My Chinese bike had stood unused for 3 months when I needed to take it for an MOT last month. The indicators and stop light weren't working so I had to separate connectors in the loom and give them a clean with emery paper and squirt switch cleaner into the indicator switch and operate it 20 or 30 times to get the indicators to work. I always give connectors a light coating of vaseline before putting them back together.
'There is a tide in the affairs of men
Which taken at the flood............'
Locked