Rear Brake Repair
-
- Member
- Posts: 1567
- Joined: Mon Jan 01, 1990 12:00 am
- Location: WEST SUSSEX UK
Rear Brake Repair
So today , Ive manufactured a replacement steel bush , hardened it with BETA 1 powder and once cleaned it will be ready for brazing
I managed to source a new cam spindle from Jampot spares eliminating all the wear
Ideal project for a winter Sunday in Tier 4 and makes use of the coal fire at the same time
You do not have the required permissions to view the files attached to this post.
-
- Member
- Posts: 1567
- Joined: Mon Jan 01, 1990 12:00 am
- Location: WEST SUSSEX UK
Re: Rear Brake Repair
You do not have the required permissions to view the files attached to this post.
-
- Member
- Posts: 373
- Joined: Wed Feb 01, 2012 1:22 pm
- Location: Vestland NORWAY
Re: Rear Brake Repair
I understand Beta1 is a carbon powder substance, made essentially from charcoal, allowing case hardening to be performed at small scale.
The composition and alternatives is revealed here:
https://www.glue-it.com/wp/materials/me ... -compound/
Who sells Beta1 in the UK?
-Knut
The composition and alternatives is revealed here:
https://www.glue-it.com/wp/materials/me ... -compound/
Who sells Beta1 in the UK?
-Knut
-
- Member
- Posts: 456
- Joined: Mon Jun 29, 2015 8:49 pm
- Location: East Yorkshire
-
- Member
- Posts: 1567
- Joined: Mon Jan 01, 1990 12:00 am
- Location: WEST SUSSEX UK
Re: Rear Brake Repair
The covers are special for P11 / G85 with the torque arm fitted ( Only available from Jampot spares , once they get some more made ! )
Thanks Ray for brazing the spacer into the back plate as originally made ! , now I can complete the rebuild of the back wheel into the swinging arm , and then just leaves the cylinder head replacement before it can go back out in the garage rather than in the kitchen although may just keep it indoors until the spring !
You do not have the required permissions to view the files attached to this post.
-
- Member
- Posts: 373
- Joined: Wed Feb 01, 2012 1:22 pm
- Location: Vestland NORWAY
Re: Rear Brake Repair
Very nice work and an excellent result! Great inspiration for me as I have to do the same for my G80CS restoration project. Thanks for sharing!
-Knut
-Knut