Rob , perhaps you should watch my P11 rebuild over the next few days , then when you have to strip yours down you will know in advance what it looks like
same Norton Atlas engine fitted to G15 and P11
Rear Loop Bottom Stud Spacer
-
- Member
- Posts: 1581
- Joined: Mon Jan 01, 1990 12:00 am
- Location: WEST SUSSEX UK
- ajscomboman
- Member
- Posts: 3959
- Joined: Mon Jan 01, 1990 12:00 am
- Location: HAMPSHIRE UK
Re: Rear Loop Bottom Stud Spacer
raffles wrote:Just trying for a bit of humour
Tony
- ajscomboman
- Member
- Posts: 3959
- Joined: Mon Jan 01, 1990 12:00 am
- Location: HAMPSHIRE UK
Re: Rear Loop Bottom Stud Spacer
I know what the bugger looks like! I've been getting too close and personal with mine!! It was supposedly a rebuilt article but it's not proving to be quite what I'd hoped. I'm awaiting some g/box bushes and a sprocket that's not as hooked as Cpt Hooks hand!! Then I'll be back into the reassembly along with new stator and rotor. I've got a little wiggle room with the new stator so hopefully I'll be able to centre it a bit better than the previous owner set it up.g80csp11 wrote:Rob , perhaps you should watch my P11 rebuild over the next few days , then when you have to strip yours down you will know in advance what it looks like
same Norton Atlas engine fitted to G15 and P11
I'll still be watching your your progress though.