Rear Loop Bottom Stud Spacer

Information relating to the Matchless G15 or AJS Model 33 750cc twin. This also includes the G15 Mk II and the G15/45
g80csp11
Member
Posts: 1567
Joined: Mon Jan 01, 1990 12:00 am
Location: WEST SUSSEX UK

Re: Rear Loop Bottom Stud Spacer

Post by g80csp11 »

Rob , perhaps you should watch my P11 rebuild over the next few days , then when you have to strip yours down you will know in advance what it looks like
same Norton Atlas engine fitted to G15 and P11
User avatar
ajscomboman
Member
Posts: 3963
Joined: Mon Jan 01, 1990 12:00 am
Location: HAMPSHIRE UK

Re: Rear Loop Bottom Stud Spacer

Post by ajscomboman »

raffles wrote:Just trying for a bit of humour
Tony

:beer: :beer:
User avatar
ajscomboman
Member
Posts: 3963
Joined: Mon Jan 01, 1990 12:00 am
Location: HAMPSHIRE UK

Re: Rear Loop Bottom Stud Spacer

Post by ajscomboman »

g80csp11 wrote:Rob , perhaps you should watch my P11 rebuild over the next few days , then when you have to strip yours down you will know in advance what it looks like
same Norton Atlas engine fitted to G15 and P11
I know what the bugger looks like! I've been getting too close and personal with mine!! It was supposedly a rebuilt article but it's not proving to be quite what I'd hoped. I'm awaiting some g/box bushes and a sprocket that's not as hooked as Cpt Hooks hand!! Then I'll be back into the reassembly along with new stator and rotor. I've got a little wiggle room with the new stator so hopefully I'll be able to centre it a bit better than the previous owner set it up.

I'll still be watching your your progress though.
Locked