I purchased a 12V Flasher unit (INDWRE06) from Paul Goff and just wanted to check to which way I should be wiring it for a Positive earth system.
The terminals on the relay are marked P (pilot), X (bulb) and L (live), so am I right in thinking that the 12V feed is connected to the X (bulb) terminal, the switch to the L (live) terminal and the warning light to P (pilot)?
Wiring a Flasher Unit
- AFPU
- Member
- Posts: 55
- Joined: Sun Oct 03, 2021 7:09 pm
- Location: New South Wales AUSTRALIA
- Location: Kenninghall
Wiring a Flasher Unit
Gary
"Any fool can make things complicated but it takes a genius to make things simple"
"Any fool can make things complicated but it takes a genius to make things simple"
-
- Member
- Posts: 1567
- Joined: Mon Jan 01, 1990 12:00 am
- Location: WEST SUSSEX UK
Re: Wiring a Flasher Unit
on his web site is a wiring diagram
http://www.norbsa02.freeuk.com/Wiringdiagrams.htm
http://www.norbsa02.freeuk.com/Wiringdiagrams.htm
- AFPU
- Member
- Posts: 55
- Joined: Sun Oct 03, 2021 7:09 pm
- Location: New South Wales AUSTRALIA
- Location: Kenninghall
Re: Wiring a Flasher Unit
Thanks.
The old one which I had previously downloaded aonly mentioned +, C and R, hence my question. All resolved now.
Switch from X (+)
Feed to L (C)
Warning Light from P (R)
The old one which I had previously downloaded aonly mentioned +, C and R, hence my question. All resolved now.
Switch from X (+)
Feed to L (C)
Warning Light from P (R)
Gary
"Any fool can make things complicated but it takes a genius to make things simple"
"Any fool can make things complicated but it takes a genius to make things simple"