Hi can any one help me with a oil pump repair or where I can buy one or get in tuch with Morgo rotary oil pump by Jorg Henze.I have tried to ring Jorg no reply
the bike is a 1958 AJS Modle 30 any help will be very very helfull had this bike for two years not yet riden it yet do to oil pump
regards Mike
oil pump modle 30
-
- Posts: 44
- Joined: Sun Jul 10, 2016 1:46 pm
- Location: BRITTANY FRANCE
-
- Member
- Posts: 601
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: FRANCE
Re: oil pump modle 30
To fit a MORGO seems to be a skillfull and expensive job !
I think you could get better ones, and refurbish them by lapping the faces.
If you could add a discharge valve it will be a huge improvement.
I had mine refurbished by the Spares Scheme (exchange in 1996 I think). Yes, you should have to fit a tap, to avoid wet sumping. Mine is earthed on the mag. I use to swiitch off the engine turning off the tap. No problem.
I think you could get better ones, and refurbish them by lapping the faces.
If you could add a discharge valve it will be a huge improvement.
I had mine refurbished by the Spares Scheme (exchange in 1996 I think). Yes, you should have to fit a tap, to avoid wet sumping. Mine is earthed on the mag. I use to swiitch off the engine turning off the tap. No problem.