Chain case seal
-
- Member
- Posts: 388
- Joined: Tue May 25, 2021 10:50 pm
- Location: Oxfordshire UK
Re: Chain case seal
I was expecting to need 4 hands to do it but was ok in the end, I put the case on loosely with the nut then started to feed the rubber in, have the nut just tight enough to hold the rubber in, I had to cut it slightly to length. I then fitted the ally band and the original bolt was just long enough I tightened this up completely then did the nut up. It seems to be holding ATF ok and I know the cases were slightly bent. Good luck
Everyday’s a learning curve.
- G3L1946
- Member
- Posts: 542
- Joined: Tue Feb 25, 2020 1:57 pm
- Location: North Yorkshire UK
Re: Chain case seal
Thanks for info
Steve
Steve