G 3 electrics

Information relating to the Matchless G3 or AJS Model 16 350cc Heavyweight
Locked
dynamic
Posts: 27
Joined: Wed Apr 14, 2021 4:57 pm
Location: Wales gwynedd

G 3 electrics

Post by dynamic »

anyone converted a G3 to electronic ignition ? mines a 62
McMaz
Posts: 48
Joined: Tue Jun 02, 2015 4:57 pm
Location: Wales

Re: G 3 electrics

Post by McMaz »

Yes, I converted my ’62 G3 a couple of year ago as the wear on the cam/ spindle was making it difficult to get a consistent gap on the points. I couldn’t find a standard, off-the-shelf kit which was suitable so rang Boyer Bransden who knew precisely what combination was required and it was delivered a couple of days later. I reused the original long bolt from the old back plate to fix the new rotor plate so just had to use a short length of tube as a spacer to compensate for the length of the spindle on the old back plate.
Sean
dynamic
Posts: 27
Joined: Wed Apr 14, 2021 4:57 pm
Location: Wales gwynedd

Re: G 3 electrics

Post by dynamic »

Hi Sean thanks for the reply I will contact Boyer, where in Wales are you ? im in Criccieth
Locked