Rather than just wait or hope for a G5 gudgeon pin to come up also ask for one from a twin as they are the same and more plentiful, or should be. Saying that I don't have any spare.dada wrote: ↑Mon Apr 25, 2022 8:51 am Hi All sry for late reply was abroad Profile Shows 250 as we had aquired a G5 couple of years later but we started with a G2 250.
Will buy stud as suggested. Thanks
Any one has a part number for a gudgepin for 350 G5 as ours is missing it was bought with a blown engine and who dismantled lost most of them.. during time.
Thanks
Dada
Cylinder head bolt
- ajscomboman
- Member
- Posts: 3972
- Joined: Mon Jan 01, 1990 12:00 am
- Location: HAMPSHIRE UK
Re: Cylinder head bolt
-
- Posts: 99
- Joined: Tue Apr 10, 2018 10:43 pm
- Location: Malta
Re: Cylinder head bolt
Parts arrived Twin Gudge Pin is short from where circlip goes in grove will need to work on lathe some spacers
- ajscomboman
- Member
- Posts: 3972
- Joined: Mon Jan 01, 1990 12:00 am
- Location: HAMPSHIRE UK
Re: Cylinder head bolt
The Gudgeon pin 022277 is the same part as fitted to the 650 twins and the 350/LW, did you happen to order one for a 500 twin with the 66mm pistons and not the 600 or 650 72mm pistons which is the same diameter in the L/W 350?
-
- Posts: 99
- Joined: Tue Apr 10, 2018 10:43 pm
- Location: Malta
Re: Cylinder head bolt
The one mensioned isn't avaialble. Yes.I had ordered the one from 500cc which is shorter by mistake.
Anyone have avaialble and can help as I am stuck in this rebuild..
Anyone have avaialble and can help as I am stuck in this rebuild..
You do not have the required permissions to view the files attached to this post.
-
- Posts: 99
- Joined: Tue Apr 10, 2018 10:43 pm
- Location: Malta
Re: Cylinder head bolt
Anyone can help ?
- ajscomboman
- Member
- Posts: 3972
- Joined: Mon Jan 01, 1990 12:00 am
- Location: HAMPSHIRE UK
Re: Cylinder head bolt
Place the request in the wanted ads and also in the Jampot. I'm sure one will turn up. I've just added the part onto our list of parts to be priced as having some will cover 600/650 twins and also the 350 L/W's. I have a box full of twin pistons bare with no rings or pins.
-
- Posts: 99
- Joined: Tue Apr 10, 2018 10:43 pm
- Location: Malta
Re: Cylinder head bolt
ok done