6" Wipac headlamp unit disassembly
-
- Member
- Posts: 182
- Joined: Wed Aug 19, 2020 11:22 am
- Location: Dorset UK
6" Wipac headlamp unit disassembly
Finally I found a Wipac 180-6 headlamp lens, however the reflector is corroded, has anyone had any success in separating the glass from the reflector?
-
- Member
- Posts: 225
- Joined: Sat Jan 01, 2000 12:00 am
- Location: HAMPSHIRE UK
Re: 6" Wipac headlamp unit disassembly
I did Max, I just gently eased/bent the lip back. it wasn't stuck in just a thin rubber seal it sat on. I had the reflector re-chromed and put it back together with a bead of clear silicone sealant.
Laurie
Laurie
-
- Member
- Posts: 182
- Joined: Wed Aug 19, 2020 11:22 am
- Location: Dorset UK
Re: 6" Wipac headlamp unit disassembly
Excellent, thanks Laurie, I will get to it.
-
- Member
- Posts: 182
- Joined: Wed Aug 19, 2020 11:22 am
- Location: Dorset UK
Re: 6" Wipac headlamp unit disassembly
Well, that didn't take too long with a keen pair of pliers and a bit of patience, now off to the platers. The ring appeared to be split so I expect there is a bit of built in obsolescence there.
You do not have the required permissions to view the files attached to this post.
-
- Member
- Posts: 225
- Joined: Sat Jan 01, 2000 12:00 am
- Location: HAMPSHIRE UK
Re: 6" Wipac headlamp unit disassembly
My ring was split in two places that's why I left it out and used silicon instead. Silicon makes a better waterproof seal as well.
Laurie
Laurie
-
- Member
- Posts: 182
- Joined: Wed Aug 19, 2020 11:22 am
- Location: Dorset UK
Re: 6" Wipac headlamp unit disassembly
I was thinking of using the rear half of the MU42 miller style unit, saves re-chrome and I know will fit the rim, probably cheaper solution too. Max
-
- Member
- Posts: 182
- Joined: Wed Aug 19, 2020 11:22 am
- Location: Dorset UK
Re: 6" Wipac headlamp unit disassembly
OK, so the MU42 unit arrived, it is fractionally bigger than the original but I know it fits the rim, popped the Miller cats eye lens out and then fitted the Wipac lens in its place with some clear silicone rubber. jobs a goodun!
You do not have the required permissions to view the files attached to this post.
-
- Member
- Posts: 225
- Joined: Sat Jan 01, 2000 12:00 am
- Location: HAMPSHIRE UK
Re: 6" Wipac headlamp unit disassembly
Excellent, great solution, wish I'd thought of that.
-
- Member
- Posts: 182
- Joined: Wed Aug 19, 2020 11:22 am
- Location: Dorset UK
Re: 6" Wipac headlamp unit disassembly
Looks alright now, never did like the cats eye lens, made the bike appear odd. M
You do not have the required permissions to view the files attached to this post.