Sleeve nut for a British Hub Company spindle

Information relating to the Matchless G2 or AJS Model 14 250cc Lightweight
Locked
acaca
Member
Posts: 1
Joined: Tue Mar 16, 2021 11:57 am
Location: Rutland UK

Sleeve nut for a British Hub Company spindle

Post by acaca »

Hi!

I've had a G2 CSR front wheel with a G2 rim on it for about 30 years. I's always wanted to put the hub on a larger rim and fit it to my G5. I've done this now but am missing one or two parts. I need spaces but the part I'm really looking for is a 20tpi sleeve nut to clamp in to the bottom of the fork. I need the reverse brake anchor arm but that can wait for now.... Any help would be appreciated. I have no drawings or measurements. I've been on to Greeves supliers but have drawn a blank. The closest I can find is a Greeves Banana Forks Wheel Nut M42/WAAA103 but it's not long enough.

Any help appreciated!!
Rangy65
Member
Posts: 434
Joined: Tue May 07, 2013 11:35 pm
Location: LINCOLNSHIRE UK

Re: Sleeve nut for a British Hub Company spindle

Post by Rangy65 »

Hi Acaca we have a complete 65 G2 CSR in the showroom at Kettering. I am happy for you to take a look and show me what parts you need. I may be able to help find some bits and pieces from the second hand shelf. Drop me a PM if you are interested.

Regards
Steve Randall
Locked