I don't have the 7/16"(043938) bolt that is at the top of the gearbox that has the hole for the adjuster bolt so I'm making one up in stainless, would anyone have one handy that they could measure the distance from the centre of the hole and the mating face to the engine plate?
Also the length of the 5/16" diameter of the other part - 042937 would be handy too.
Thanks
Martin
Gearbox adjusting bolt
- Martin.S
- Posts: 443
- Joined: Sun Mar 18, 2018 12:02 pm
- Location: Bristol UK
Gearbox adjusting bolt
You do not have the required permissions to view the files attached to this post.
-
- Posts: 27
- Joined: Sun Oct 28, 2018 8:58 am
- Location: United Kingdom
Re: Gearbox adjusting bolt
Hi Martin, mine measures at 0.375"
Cheers,
Bernie
Cheers,
Bernie
-
- Member
- Posts: 1176
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: KENT UK
Re: Gearbox adjusting bolt
I would have thought it to be closer to 4" than 3/8"
-
- Posts: 27
- Joined: Sun Oct 28, 2018 8:58 am
- Location: United Kingdom
Re: Gearbox adjusting bolt
Haha! I was answering the first part of the question! Just seen the second part and will measure it up in the morning and post back.
Cheers,
Bernie
Cheers,
Bernie
- Martin.S
- Posts: 443
- Joined: Sun Mar 18, 2018 12:02 pm
- Location: Bristol UK
Re: Gearbox adjusting bolt
Thanks Berni
-
- Posts: 27
- Joined: Sun Oct 28, 2018 8:58 am
- Location: United Kingdom
Re: Gearbox adjusting bolt
Just measured both to be sure:
Underside of head to C/L of through hole is 0.375" on both parts.
Length of shanks is 2.875" for 042937 and 4.0" for 043938.
Underside of head to C/L of through hole is 0.375" on both parts.
Length of shanks is 2.875" for 042937 and 4.0" for 043938.
- Martin.S
- Posts: 443
- Joined: Sun Mar 18, 2018 12:02 pm
- Location: Bristol UK
Re: Gearbox adjusting bolt
A big Thank you Bernie - much appreciated.