torque settings ?

Information relating to the Matchless G2 or AJS Model 14 250cc Lightweight
User avatar
dave16mct
Member
Posts: 3234
Joined: Mon Jan 01, 1990 12:00 am
Location: LANCASHIRE UK

Re: torque settings ?

Post by dave16mct »

6 web holding nuts 6 Lbs/ft
Big end caps 22 lbs/ft
cylinder head nuts 22 Lbs/ft

Dave.
User avatar
dave16mct
Member
Posts: 3234
Joined: Mon Jan 01, 1990 12:00 am
Location: LANCASHIRE UK

Re: torque settings ?

Post by dave16mct »

If you have no manual see here:
http://archives.jampot.dk/book/Workshop ... models.pdf
Dave.
Lawries
Posts: 13
Joined: Fri Oct 08, 2021 10:32 am
Location: UK

Re: torque settings ?

Post by Lawries »

Rocker cover: As it's an aluminium to aluminium surface with steel bolts into aluminium threads, I interpreted "common sense" as 18 - 20Nm. Seems ok, didn't strip any threads and it's not leaking oil, new gasket, greased one side and a smidgen of blue hylomar on the other.

( I know many members don't value blue hylomar but I've been using it successfully for 40+ years )
Locked