The measurements for the foot peg spacers 1/4" (042369) and 1&1/8" (042368) by a common 5/8" I/D and 7/8" O/D are, I think, for the single chain version G2 and not for the CSR with duplex (wider chain case), does anyone have the correct measurements for the CSR? if they are different.
cheers, Max
CSR Foot peg spacers
-
- Member
- Posts: 179
- Joined: Wed Aug 19, 2020 11:22 am
- Location: Dorset UK
CSR Foot peg spacers
You do not have the required permissions to view the files attached to this post.
-
- Member
- Posts: 55
- Joined: Tue Oct 06, 2020 10:32 am
- Location: Berks, UK
Re: CSR Foot peg spacers
Hi Max,
I measured my nearside spacer on my '66 and its 1.1/8 as listed. I was missing the offside one so a made one to 1/4'' so i cant say if that's correct.
The foot pegs fit and clears the duplex casing OK although on looking at it I suppose its a bit tight.
However as this is certainly not the first time this bike has been apart i cant say for sure if the dimensions are correct / spacer is for this bike. Interested if anyone has a different size.
I measured my nearside spacer on my '66 and its 1.1/8 as listed. I was missing the offside one so a made one to 1/4'' so i cant say if that's correct.
The foot pegs fit and clears the duplex casing OK although on looking at it I suppose its a bit tight.
However as this is certainly not the first time this bike has been apart i cant say for sure if the dimensions are correct / spacer is for this bike. Interested if anyone has a different size.