K2F Magneto

[Taid]

I want to put a remote cut-out on my M31, linked to the anti-sumping tap

The Lucas part available on the net is screw on and seems to match illustrations of the K2F, but my magneto is different,. (it is marked K2F on the plate)

The existing end cover with the cut out button is all metal, held on 2 studs diagonally arranged ..

I bought what seemed to be a direct replacement with a electrical connection for the cut out as in the following photo.

But it doesn't fit .. the 'ears' are too thick and leave no room for the nuts and the internal diameter is fractionally too small ..

I thing I can possibly modify it to fit, but being inately idle, does anyone know of a supply of a cut-out end cap that is a correct fit for this model of the K2F

Screenshot_20220918-111418_Chrome.jpg

[SPRIDDLER]

..........as in the following photo.

Photo??
Where did you buy the end cap from?

Club spares?
Link here:

https://www.amoc-parts.com//store/comer ... duct=23661

459269 K2F MAGNETO END CAP WITH REMOTE KILL TERMINAL

K2F magneto end cap with remote kill terminal

Price : £ 39.00 each

Price : £ 46.80 each (incl. VAT)

Stock : Available



https://www.amoc-parts.com//store/comer ... duct=23661

[Taid]

Once again, thank you ,S ..

Photo inserted ..

It wasn't club spares (dunno why didn't check)

It's not illustrated .. is it for this model ?

I now note there is also

https://www.amoc-parts.com//store/comer ... duct=22084

Must contact stores before I go ordering ..

Thanks again ..

[SPRIDDLER]

The Lucas part available on the net is screw on and seems to match illustrations of the K2F, but my magneto is different,.

I've never had a K2F mag so can't comment on the club ones. Maybe the cheaper one is Bakelite and the other one is steel?

I assume the photo is of your new but wrong end cap which doesn't help much (as you said it doesn't fit).
A pic of your different mag end would help someone who knows about K2F's to advise what end cap would fit it.

[Eamonn]

Searching for the Lucas part number on the net results in:


459269

459269.jpg

458619

458619.jpg

[Taid]

20220918_132045~2.jpg

I had (I though) put up a pic ..

Try again ..

[Taid]

Searching for the Lucas part number on the net results in:


459269
459269.jpg

458619
458619.jpg

Thank you .. now succeeded in putting pic up .. nothing like those in stores , unfortunately ..

RK2FBC {as a swap} appears to be the magneto I have ..

[ajscomboman]

Searching for the Lucas part number on the net results in:


459269
459269.jpg

458619
458619.jpg

Thank you .. now succeeded in putting pic up .. nothing like those in stores , unfortunately ..

RK2FBC {as a swap} appears to be the magneto I have ..

The end cap you posted is correct for your model. The club do not stock the kill button option for this as it was never a factory option.

[Taid]

Ah, thanks .. that explains the fruitless search ..

The one I found looks to be right, but will need some quiet fettling,

Thanks again, CM..

[bitza]

Tony Cooper told me when he restored my mag the mag with the kill button has a different screw on end cap and bearing housing.