K2F Magneto

bitza · Post by **bitza** » Mon Sep 19, 2022 4:46 pm

Tony Cooper told me when he restored my mag, the mag with the kill button has a different screw on end cap and bearing housing.

Post by **Taid** » Mon Sep 19, 2022 5:35 pm

bitza wrote: ↑Mon Sep 19, 2022 4:46 pm Tony Cooper told me when he restored my mag, the mag with the kill button has a different screw on end cap and bearing housing.

Yes, but a different version on M31 .. held on by 2 2ba? nuts .. no Lucas remote kill available for it, but have found something intended to do the job, but will require fettling..

bitza · Post by **bitza** » Mon Sep 19, 2022 8:24 pm

Yes I know that is how the bearing housing is fitted, but could you mod the original by using a suitable pan head screw and nut
Drill the head / shank to suit mag pick up brush ,a couple of small fibre washers, and a short length of insulating sleeve.

ajsph · Post by **ajsph** » Mon Sep 19, 2022 9:49 pm

here are 2 pictures of a cap I have modified
Poul

DSC01721.jpg

DSC01720.jpg

Post by **Taid** » Mon Sep 19, 2022 10:09 pm

Ah, thank you, A ..

That's what I was looking for .

. may I ask where you obtained the carbon brush?

T.

ajsph · Post by **ajsph** » Tue Sep 20, 2022 6:15 am

Carbon brush, from the club
Poul

Post by **Taid** » Tue Sep 20, 2022 8:16 pm

ajsph wrote: ↑Tue Sep 20, 2022 6:15 am Carbon brush, from the club
Poul

Right, thanks .. Taid

AJS & Matchless Owners Club forum

K2F Magneto

Re: K2F Magneto

Re: K2F Magneto

Re: K2F Magneto

Re: K2F Magneto

Re: K2F Magneto

Re: K2F Magneto

Re: K2F Magneto