Fitting Front Indicators to G12 CSR

Helpful information and requests for assitance and advice
User avatar
dave16mct
Member
Posts: 3234
Joined: Mon Jan 01, 1990 12:00 am
Location: LANCASHIRE UK

Re: Fitting Front Indicators to G12 CSR

Post by dave16mct »

Or you could buy these from Hitchcocks. https://accessories.hitchcocksmotorcycl ... of-4/27816
I'm making something similar at the moment. PS are you sure the thread is M8? Mine are M10, which would fit these adaptors.
Dave.
User avatar
Taid
Posts: 710
Joined: Mon Oct 07, 2019 3:35 pm
Location: Shropshire UK

Re: Fitting Front Indicators to G12 CSR

Post by Taid »

Tolly wrote: Sun Jan 02, 2022 2:37 pm Hi Taid, where did you get your mirrors with the flashers in? :beer:
Hi Tolly ..

To be honest, not got a clue for certain .. maybe via Amazon, but just searched the net till I found something I liked ,,

picture below ..

They have repeaters built into the glasses, so you can see that they are working ..

The (just about visible) rears are in the sides of the number plate carrier, but had a problem with them .. the fixings weren't square with the light, so had to break out the threaded tube and refix it with Araldite ..
You do not have the required permissions to view the files attached to this post.
___

Now sold ... 1956 AJS 16MS Bitsa .. HSU 414 .. rebuilt/re-registered 1987
Locked