Hi I have a 600cc crankshaft that I brought on ebay it as markings on it and I dont know what they mean Can any one help find out what they mean
thanks Mike
600cc crankshaft
-
- Posts: 44
- Joined: Sun Jul 10, 2016 1:46 pm
- Location: BRITTANY FRANCE
600cc crankshaft
You do not have the required permissions to view the files attached to this post.
- dave16mct
- Member
- Posts: 3242
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LANCASHIRE UK
Re: 600cc crankshaft
It's the size of the journals. 1.617" for the big end journal. 1.615" for the centre main journal.
Dave.
Dave.
-
- Posts: 44
- Joined: Sun Jul 10, 2016 1:46 pm
- Location: BRITTANY FRANCE
Re: 600cc crankshaft
Can you tell me if it needs a regrind or if it is any good
Mike
Mike
- dave16mct
- Member
- Posts: 3242
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LANCASHIRE UK
Re: 600cc crankshaft
If the sizes are correct it's on it's first regrind (- 0.10" )
See the grinding details here: http://archives.jampot.dk/book/Workshop ... CHABLE.pdf
Page 24
Dave.
See the grinding details here: http://archives.jampot.dk/book/Workshop ... CHABLE.pdf
Page 24
Dave.
-
- Posts: 44
- Joined: Sun Jul 10, 2016 1:46 pm
- Location: BRITTANY FRANCE
Re: 600cc crankshaft
Thanks very much Dave the trouble is I live in France as I don't speak French so I cant not get any info here so thanks to the club and the members that help
thanks again Mike
thanks again Mike
- dave16mct
- Member
- Posts: 3242
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LANCASHIRE UK
Re: 600cc crankshaft
Those journals look good in the pictures, so if you've a micrometer or a digital caliper, measure to check if they're oval. You may not need to regind if they measure OK.
Dave.
Dave.