grease gun nipple adaptor
- 1608
- Member
- Posts: 2493
- Joined: Mon Oct 05, 2009 1:00 am
- Location: ESSEX UK
grease gun nipple adaptor
I've been gifted a nice modern grease gun, unfortunately its designed to fit modern grease nipples that are bigger than those fitted to our old bikes. Is it possible to get a suitably sized smaller end fitting for the gun. When searching all the likely outlets the only adaptors available seem to be the standard larger size but only differ in that they are angled, longer or flexible etc.etc. Thanks
- Andy.S
- Member
- Posts: 152
- Joined: Thu Jun 30, 2016 5:50 pm
- Location: Northamptonshire UK
- 1608
- Member
- Posts: 2493
- Joined: Mon Oct 05, 2009 1:00 am
- Location: ESSEX UK
Re: grease gun nipple adaptor
Thanks Andy, but I'm a bit reluctant to buy that many nipples ( at those rices ) I'll never use. I'll search onward or come up with something.
- Duncan
- Member
- Posts: 2132
- Joined: Thu Jul 10, 2003 1:00 am
- Location: HAMPSHIRE UK
Re: grease gun nipple adaptor
The needle adaptor that Mick D recommends is perfect for greasing all of the bikes nipples.
viewtopic.php?p=236048#p236048
viewtopic.php?p=236048#p236048
- 1608
- Member
- Posts: 2493
- Joined: Mon Oct 05, 2009 1:00 am
- Location: ESSEX UK
Re: grease gun nipple adaptor
Thanks Duncan, so presumably the needle adapter depresses the ball bearing in the small original grease nipples?
- Duncan
- Member
- Posts: 2132
- Joined: Thu Jul 10, 2003 1:00 am
- Location: HAMPSHIRE UK